EverySpec Standards
Home > Library > MIL-PRF > MIL-PRF-030000-79999 > MIL-PRF-39035E AMENDMENT-2

MIL-PRF-39035E (W/ AMENDMENT-2), PERFORMANCE SPECIFICATION: RESISTOR, VARIABLE, NONWIREWOUND (ADJUSTMENT TYPE), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (24-APR-2014)

MIL-PRF-39035E (W/ AMENDMENT-2), PERFORMANCE SPECIFICATION: RESISTOR, VARIABLE, NONWIREWOUND (ADJUSTMENT TYPE), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (24-APR-2014)., This specification covers the general requirements for nonestablished reliability (non-ER) and established reliability (ER), multiturn lead-screw actuated, and single-turn, nonwirewound, variable resistors with a contact bearing uniformly over the surface of the entire resistive element, when positioned by an actuator. These resistors are capable of full-load operation (when the maximum resistance is engaged), at a maximum temperature of 150 Degrees C, with a resistance tolerance of ±10 percent. The ER resistors will have life failure rate levels ranging from 1.0 to 0.001 percent per 1,000 hours (see 1.2.1.5). These failure rate levels are established at a 60 percent confidence level maintained at 10 percent producer\'s risk on the basis of the life tests.

MIL-PRF-39035 Rev. E

    
 Status:
Active

 FSC Code:
 5905 - Resistors

Version:
E04-2014406.91 KB MIL-PRF-39035E_AMENDMENT-2

Simple Search
MilSpec Search



About Us   |   Terms of Use   |   DMCA   |   Privacy   |   EverySpec LLC © 2009 - 2024   All rights reserved.