MIL-STD-413C (NOTICE 2), DEPARTMENT OF DEFENSE TEST METHOD: VISUAL INSPECTION GUIDE FOR RUBBER ELASTOMERIC O-RINGS (17 MAR 2011) [SEE NOTICE 2 FOR REPLACEMENT INFORMATION]

MIL-STD-413C (NOTICE 2), DEPARTMENT OF DEFENSE TEST METHOD: VISUAL INSPECTION GUIDE FOR RUBBER ELASTOMERIC O-RINGS (17 MAR 2011) [SEE NOTICE 2 FOR REPLACEMENT INFORMATION]., MIL-STD-413C, dated 8 December 1980, is hereby canceled. The acceptance criteria for O-rings as defined in ISO 3601-3, ―Fluid power systems — O-ring — Part 3: Quality acceptance criteria,‖ supersedes MIL-STD-413. It is recommended purchasers specify the ISO 3601-3 Grade to be used with a sampling plan on the purchase order. SAE AS5752 is recommended for use as the acceptance criteria for other (non-O-ring) aerospace elastomeric seals. CAUTION: The supersession information is valid as of the date of this notice and may be superseded by subsequent revisions of the superseding document. (Copies of ISO publications may be purchased from the International Organization for Standardization’s Website at www.iso.org and from the American National Standards Institute’s Website at www.ansi.org.)